Bullyliner Spray-On Truck Bed Liner 4 liter/1 gallon kit NO GUN- Free shipping

Description

With This Order You'll Be Supplied: 1 x Kit (4 X 1LT CANS IN A BOX) with Free Mainland USA delivery.
NO-Mixing, NO Wastage, NON-Hazardous
, just open can and use ! Bullyliner is single component, environmentally friendly,water based and made from recycled tires, enhanced with Self-Cleaning Nano Technology, Bully liner vulcanizes rubber on almost any surface including… Metal, Concrete, Wood, Plastic and Asphalt all cured in ambient air! Applied by Roll, Brush or by Bully liner Spray Gun, is like lining the surface with car tires.
Protects All Surface Against  Dents, Scratches, Rust,and Corrosion.
8 standard Colors
Available
Bullyliner dent, scratch sound damping coating, made from recycled tyres.
Easy roll, brush or spray-on.
Apply to Anything & Everything
Bullyliner is made from recycled
Tyre
technology, is non-toxic ultra-low VOC chemistry that cures in ambient air. Allowing its user to virtually vulcanize rubber onto almost any surface! Applied onto any surface is like lining it with rubber tyres.
Bullyliner can be build up to any thickness by simply applying multiple coats.
Application:
Lightly sand area and wipe with acetone to remove all dust (Surface must be clean from any contamination)
Mask any areas you want protected and to avoid any over-spray
Apply first coat of Bullyliner evenly to the required area using brush, roller, or spray gun,
2nd coat of Bullyliner can be applied when first coat is touch dry
Allow 72 hours for full curing
Ensure all temperatures are above 60f during application and curing
Application rate:
1 Bullyliner™ Kit (4 x 1ltr Cans) Covers ∗Approx 260 SQFT. (24 Sqm) In One Coat. Minimum 2 Coats Are Recommended For Light To Moderate Abrasion Resistance. 3 Or More Coats Are Required For Commercial Use. Bullyliner™ Can Be Built To Any Thickness By Simply Applying Multiple Coats
.
Bullyliner™ can be rolled, brushed or sprayed on. When applying Bullyliner, ensure temperatures are above 60F/15c .When spray applying, a minimum 8 gallon 150 PSI air compressor can be used for small projects, for larger projects requiring  continuous air flow over longer time frames, a 20 gallon, 175 PSI air compressor is more suited, When using Bullyliner we recommenced using the Bullyliner spray gun. Best application air pressure for smooth even coverage is between 40-60 PSI.
www.bullyliner.com